DESCRIPTION
AmTherm™ 9030 is an industrially inhibited propylene glycol based heat transfer fluid. It is designed to provide freeze and burst protection, excellent thermal conductance, protection against system corrosion and fouling and long term system stability in recirculating water loops.

ADVANTAGES
AmTherm™ 9030 has a system operating range of -50ºF to 250ºF, with burst protection to -100ºF and freeze protection to -60ºF. System freeze and burst points are controlled by the ratio of glycol to water. Below are the system typical properties at a one to two (33.3%) dilution, (one part glycol/two parts water):

Density (lbs./ft 3 ):    65.3 @ 40ºF
Specific Gravity:    1.02 @ 68ºF
Weight/Gallon:    8.52 lbs. @ 40ºF
pH:    7.0 - 8.0
Viscosity:    5.75 cps @ 40ºF
   0.68 cps @ 180ºF
Flash Point:    None to boiling
Freeze Point:    8.0ºF
Boiling Point:    216.0ºF
Specific Heat:    0.894 BTU/(lb)(ºF)@ 40ºF

AmTherm™ 9030 is suitable for ice and thermal storage systems. It is dyed fluorescent green for easy system leak detection.

Back to List of Products   ||   Dealer Information   ||   Material Saftey Data Sheet   ||   Technical Data Sheet

DESCRIPTION
AmTherm™ 9040 is an industrially inhibited ethylene glycol based heat transfer fluid. It is designed to provide freeze and burst protection, excellent thermal conductance, protection against system corrosion and fouling and long term system stability in recirculating water loops.

ADVANTAGES
AmTherm™ 9040 has a system operating range of -50ºF to 250ºF, with burst protection to -100ºF and freeze protection to -60º F. System freeze and burst points are controlled by the ratio of glycol to water. Below are the system typical properties at a one to two (33.3%) dilution, (one part glycol/two parts water):

Density (lbs./ft 3 ):    70.1 @ 68ºF
Specific Gravity: .    1.05 @ 68ºF
Weight/Gallon:    8.76 lbs. @ 68ºF
pH:    7.0 - 8.0
Viscosity:    3.4 CP @ 40ºF
   0.518 CP @ 180ºF
Flash Point:   None to boiling
Freeze Point:    3.0ºF
Boiling Point:    218.0ºF
Specific Heat:    0.89 BTU/(lb)(ºF) @ 40ºF
Thermal Conductance:    0.237 BTU/(hr)(ft 2 )(ºF/ft) @ 40ºF

AmTherm™ 9040 is suitable for ice and thermal storage systems. It is dyed fluorescent yellow for easy system leak detection.

Back to List of Products   ||   Dealer Information   ||   Material Saftey Data Sheet   ||   Technical Data Sheet